A194 2H/A563 DH Heavy hex nut is similar to a standard hex nut, but is thicker and wider and conforms to ASTM specifications.

ACME threaded studs and all thread rod are appropriate for carrying heavy loads. A variety of thread pitches are available.

The Acorn or cap nut is comprised of two integrated pieces, a hex nut and an acorn-shaped top.

Fully threaded rods have threads from one end to the other.

Allen nut, a versatile fastener, has a 12-point socket on one end, internal threads on the other.

Our bit locs (hex socket bit) are tools used for socket drives.

Taps/Cuts threads to the bottom of a blind application. Has continuous cutting thread with very little taper.

Clevis pin is part of a three-piece fastener (commonly called a shackle). Clevis pins have a domed head at one end and either a cross hole or threaded shank on the other.

Coil-rod has widely spaced, shallow threads.

Cotter pins are metal fasteners made to be inserted into slots or holes to secure an assembly. One end extends slightly beyond the other end. Ideal to anchor assemblies and hold them in place by spreading the metal wires outward.

Fluted countersink drills used for cutting countersunk holes to fit screws of varying head dimensions.

Extended hex nut has internal threads on each end. Ideal to join two externally threaded rods.